Ethernet Interface; Graphic Interface - Keba KeContact M20 Manual De Configuración

Ocultar thumbs Ver también para KeContact M20:

Idiomas disponibles

Connections and wiring

To disconnect, proceed as follows:

1) Pull out the USB component.

2) Press on the protective dust cap firmly (optional).

Ethernet interface

The Ethernet interfaces are used for communication with non-real-time-ca-

pable networks.

Fire hazard from transient currents

The shield of the Ethernet interface is not galvanically isolated. If there are

connections to a device outside the building installation or to another

equipotential bonding system, there may be high transient currents. In this

case, use suitable optical transmission of the Ethernet interface.

Pin assignment

Fig. 6-21: Pin assignment RJ45 socket

The KC-M20 features a VGA and HDMI/DP combo connector.

This interface is not currently approved for use.

Signal designation

Input/output

Bidirectional

Configuration manual V1.01