Removing - Keba KeContact M20 Manual De Configuración

M20
Fig. 5-19: Installing the wall brackets
3) The KC-M20 can be installed at various distances from the wall using
4) Install the KC-M20 on the wall (1).
Fig. 5-20: Installing the KC-M20 on the wall
The KC-M20 is installed on the wall.
5.7

Removing

Dismantling from the top hat rail
Tools required:
●
To remove the KC-M20, proceed as follows:
1) Remove the KC-M20 from the top hat rail.
2) Remove the mounting clip by unscrewing the three M3 screws.
3) Remove the brackets by unscrewing the four M4 screws.
Configuration manual V1.01
© KEBA 2022
the predrilled screw holes.
Phillips screwdriver
Mounting and installation instructions
269