Antenna - Keba KeContact M20 Manual De Configuración

M20
6.5

Antenna

The antenna connectors are on the front of the module. An antenna can be
attached directly to the device (for wall installation) or via cable (for control
cabinet installation). The antenna is included in the scope of supply.
Fig. 6-22: Antenna for control cabinet
6.5.1 Mounting the antenna
CAUTION!
Danger to life from electromagnetic fields
To adhere to the limit values for people's exposure to electromagnetic fields,
it is necessary to mount the antenna at least 25 cm away from people.
Mounting the antenna directly on the device
To mount the antenna, proceed as follows:
1) Switch off devices connected to the KC-M20 and disconnect the power
2) Tighten the antenna (2) at the antenna connection (1).
The antenna has been installed.
Mounting the antenna on the control cabinet
To mount the antenna, proceed as follows:
1) Switch off devices connected to the KC-M20 and disconnect the power
2) Pull the adhesive film off the antenna and attach the antenna to the out-
Configuration manual V1.01
© KEBA 2022
cables.
cables.
side of the control cabinet.
Connections and wiring
273