Space Requirement - Keba KeContact M20 Manual De Configuración

Mounting and installation instructions
9) Insert the circuit board at an angle (1) and tilt it down (2)
Fig. 5-10: Inserting the circuit board
10) Secure the circuit board with the screw. Check that the connection cable
11) Set the lower housing cover on the housing and mount it with screws
The SIM card is inserted.
ESD
Observe the ESD notes in the chapter
5.4

Space requirement

Embedded PC
Fig. 5-11: Space requirement (dimensions in mm) for control cabinet installation
264
of the antenna is positioned securely.
(max. torque of 0.59 Nm, tolerance ±0.05 Nm).
5.2 ESD information.
Configuration manual V1.01
M20
© KEBA 2022