Installing The Light Plate - Kichler 52 Tide Manual De Instrucciones

INSTALLING THE LIGHT PLATE

Step 1. Remove the screw marked with a brown dot label on the mounting
plate and keep for later use. Loosen the other two (do not remove).(Fig.20)
Mounting Plate
Step 2. Place the two slot holes on the light plate over the 2 screws previously
Screw
loosened from the mounting plate. Rotate the light plate until it locks in
place at the narrow end of the key holes. Secure by tightening the 2 screws
previously loosened and the one previously removed. (Fig. 21)
Fig. 20
Mounting Plate
Light Plate
Fig. 21
14 | KICHLER.COM