ARGENTO MiniMax Manual Del Usuario página 14

Positioning the handlebars
Position the handlebars on the handlebar attachment taking care to centre and adjust them correctly so they slot onto the
controls, tightening the handlebar attachment lever (tightening device between the handlebars and handlebar attachment).
Handlebar stem plate assembly/disassembly instructions for handlebar installation/removal (if necessary - optional)
Remove the handlebar stem from the top end
of the handlebar attachment as follows:
Remove the screw number 1 and then the
lever number 2.
Then proceed to remove the metal plate
number 3 and finally remove the metal plate
number 4 by sliding it sideways.
Proceed to reassemble the previously
removed handlebar attachment plate in the
reverse sequence.
Make sure to tighten properly to avoid
dangerous situations while riding.
13