The electrically power assisted cycle has a control device on the handlebar, LCD display, powered by the battery supplied
with the bike which controls all the bike's electrical and electronic functions.
• LCD display - CDC13-BT
Overview of controls and symbols
1.
Indicator light for light ON
2. Assist: indicator of the assisted pedalling level
selected (number)
3. Error: malfunction warning light
4. Indicator light for walk assist mode ON
5. Digital speedometer: indicator light for speed detect-
ed during use (Km/H or MPH)
6. AVG: display of average speed data recorded during
last use (Km/h or MPH)
7.
MAX: display of maximum speed data recorded during
the last use (Km/h or MPH)
8. TRIP: display of partial distance travelled (Km or Miles)
9. ODO: display of total distance travelled (Km or Miles)
10. Travel mode corresponding to the selected assisted
pedalling level (ECO-STD-Turbo)
11. Indicator light for residual battery charge
12. M: mode button (MODE)
13. Button to vary and/or decrease value (-)
14. ON/OFF button
15. Button to vary and/or increase value (+).
Fold the entire frame of the electrically power assisted cycle.
To open the bike frame, carry out the sequence in reverse.
6. Display
17