Installation; Installation Prerequisites; Ice Machine Dimensions; Minimum Cut-Out For Built-In Installations - Manitowoc SM Serie Manual De Instalación, Operación Y Mantenimiento

Installation Prerequisites

• Must have open site (gravity) drain available or purchase
optional drain pump (see Water Supply and Drain
Requirements).
• Must have a grounded, polarized electrical power
supply on a dedicated electrical circuit (only appliance
on circuit). If GFCI (ground fault circuit interrupter) is
required by your local electrical code, it must be breaker
type, not outlet type (see Electrical Service).
• Must have cold water supply line available at Ice Machine
(see Water Supply and Drain Requirements).
• Clearance and air temperatures must be met (see
Location of Ice Machine).
• If built into a cabinet, ice machine must be removable
for yearly descaling/sanitizing procedure (see Interior
Descaling and Sanitizing in section 3).
Part Number 000001590 Rev05 07/22
Section 2

Installation

Ice Machine Dimensions

23"

Minimum Cut-Out For Built-In Installations

Height
35" (89 cm)
4.5"
14.75"
Width Depth
15" (38 cm) 26" (65 cm)
33.5"
9