Control; Important - SPORTSTECH VP500 Manual De Usuario

The vibration plate can be operated both via the console on the device and via the wristband remote
control. You can choose between an automatic and a manual mode. You can use the resistance bands
in either mode.
Use the button on the device only after you have dismounted from the device in order to
avoid possible tipping over!
Bracelet remote control functions
!
IMPORTANT: The signal range of the remote control is a maximum of 2.5 meters.

CONTROL

Power: Press the Power button to switch the device on or
off when the power is connected.
Auto mode: Activate the with a single click
Automatic mode. Press the button repeatedly to switch
between the programs:
P1: 3D lateral oscillation + blood circulation massage
P2: 3D swing function
P3: 3D blood circulation massage + linear surfing function
Only programs can be selected in automatic mode. The
speed and time cannot be adjusted in this mode.
Speed +: In manual mode, press Speed + to increase the
speed in steps of 1-60.
Speed-: In manual mode, press Speed- to decrease the
speed in steps of 1-60.
Manual mode: Here you can set the 7 main functions of the
device individually:
1 click: switch on the oscillation function.
2 clicks: switch on the vibration function.
3 clicks: switch on the linear function.
4 clicks: switch on the oscillation function + vibration.
5 clicks: switch on the oscillation + linear function.
6 clicks: switch on vibration + linear function.
7 clicks: switch on the oscillation and linear function + vibration.
When using manual mode, you can set the desired time in stand-
by, but not the speed. During the operation itself, however only the
speed is adjustable, not the time.
32