Table Of Contents Of Product; Technical Features; Specifications To Assemble Your Carrier - Bobike ONE MAXI 1P&E-BD Manual De Instrucciones

EN
A. MAIN SEAT
B. SEAT BELT
B1. SHOULDER RESTS
B2. BELT ADJUSTER
B2.1. UPPER ADJUSTMENT BUTTON
B2.2. BELT GUIDE
B3. BELT STRAP
B4. LOWER ADJUSTMENT BUTTON
C. SAFETY BELT FOR BICYCLE FRAME
D. FOOTREST
D1. FOOTREST STRAP
D2. FOOTREST BUTTON
D3. FOOT SUPPORT PEG

SPECIFICATIONS TO ASSEMBLE YOUR CARRIER

CAUTION
• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• This child bicycle seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
• This child bicycle seat must be assembled on bicycles with round and
oval frames with diameters ranging from Ø28 to Ø40 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26", 27,5" and 28".
• This child bicycle seat is only suitable for carrying children with a
maximum weight of 22 Kg (and children with recommended ages ranging
from 9 months to 5 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on

TABLE OF CONTENTS OF PRODUCT

F. CENTER OF GRAVITY
G. SEAT CUSHION
H. SEAT MOUNTING BASE
H1. 4 x SCREWS
H2. 4 x METALLIC CLAMPS
H3. 2 x SCREWS
H4. 4 x PROTECTIVE CLAMPS
H5. INSERTION OPENING FOR THE
METALLIC PROTECTION SYSTEM
H6. ALLEN KEY NRº 5
I. OPENING AND CLAMPING JAW
J. SAFETY METALLIC DEVICE
K. METALLIC BRACKET

TECHNICAL FEATURES

How and where the carrier is to be attached to the bicycle.
MAXIMUM CHILD
WEIGHT 22 kg
WARNING
OK
COMPATIBLE
FRAMES
80 MM
Ø 28 TO 40 MM
ROUND
NOT OK
NOT COMPATIBLE BICYCLES
CARBON
(48,5 lbs)
FIBER
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts for
optimum comfort and safety of the child. It's also important that the seat
does not slope forward, so that the child does not tend to slide out of it. It's
also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.
4
K1. 4 x SCREWS
K2. FRONT MOUNTING BLOCK
K3. BLOCK BUTTON
K4. REAR METALLIC MOUNTING PLATE
L. METALLIC SUPPORT BAR
L1. 4 x LIMITERS OF THE METALLIC
SUPPORT BAR
L2. METTALIC SUPPORT BAR LATERAL
CLAMPING POINT
M. SAFETY BUCKLE
M1. SAFETY BUCKLE RELEASES
M2. SAFETY BUCKLE SOCKET
N. TRACEABILITY INFORMATION
NOT OK
NOT COMPATIBLE
BICYCLES
OVAL SQUARE TRIANGULAR
REAR SUSPENSION
SHOCK ABSORBER
CARBON FIBER
MOTOR (MOPEDS
AND SCOOTERS)