Insert Or Replace Batteries - Well Health WH-UAEBPM Manual De Instrucciones

INSERT OR REPLACE BATTERIES

1. Remove the battery cover.
2. Insert new batteries into the battery compartment as shown, taking care that the
polarities (+) and (-) are correct.
3. Close the battery cover, Use only LR03, AAA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will
not work.
When (LOW BATTERY mark) blinks in the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
when the batteries run out.
Please ensure to distinguish positive polar "+" and negative polar "-" of batteries
when replacing batteries.
Batteries, which have fluid on surface or be modified, cannot be inserted into the
products.
Battery short circuit must be prevented.
Battery life varies with the ambient temperature and may be shorten at low
temperatures.
The batteries may leak and cause a malfunction.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a shorter life.
Used batteries may leak and damage the main unit. Pleases observe the
following points.
* lf you are not going to use the unit for a long period of time (approximately
three months or more), remove the batteries.
* Replace worn batteries with their polarities in the correct direction.
1.5V Batteries
(LR03 or AAA)
(LOW BATTERY mark) does not appear
Disposal of empty battery to
the authorized collecting party
subject to the regulation of each
individual territory.