an additional factor of 10/3 has been incorporated into the formulae used in
calculating the recommended separation distance for transmitters in these
frequency ranges.
c Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM and
FM radio broadcast and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered. If the
measured field strength in the location in which the Model PG-800B18 is used
exceeds the applicable RF compliance level above, the Model PG-800B18
should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as re-orienting or
relocating the Model PG-800B18.
d Over the frequency range 150 kHz to 80 MHz, field strengths should be less
than 10 V/m.
Recommended separation distances between portable and mobile RF
communications equipment and the Model PG-800B18
The Model PG-800B18 is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the
Model PG-800B18 can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications equipment
(transmitters) and the Model PG-800B18 as recommended below, according to
the maximum output power of the communications equipment.