How To Take Proper Measurements; How To Measure Blood Pressure - Well Health WH-UAEBPM Manual De Instrucciones

HOW TO TAKE PROPER MEASUREMENTS

For the most accurate blood pressure measurement:
PATIENT position in NORMAL USE, including:
1) comfortably seated.
2) legs uncrossed.
3) feet flat on the floor.
4) back and arm supported.
5) middle of the CUFF at the level of.
Remain still and keep quiet during measurement.
Relax as much as possible and not talk during the measurement process.
Measure your blood pressure at about the same time every day.
Do not measure right after physical exercise or a bath. Take a rest for twenty or
thirty minutes before taking the measurement.
It could affect the readings in the below conditions:
Within in an hour after dinner, after having wine, coffee, red tea, sports, bathing;
talking, being nervous, being in unsteady mood, bending forward, moving, room
temperature dramatically changing during measuring; In the moving vehicles,
long time continuous measuring.

HOW TO MEASURE BLOOD PRESSURE

1. Set up the arm cuff to your upper arm as previous section of "ATTACHING THE
ARM CUFF"
2. Press the "ON/OFF" button, all icons appear two seconds on DISPLAY, then
switch to measurement, and display "0" or last measurement record.
3. Start measurement, the cuff in the strap will automatically inflate. the mark(
will flash on LCD. such measurements completed, LCD display measurement
results.
ON/OFF
AVG
mmHg
A M
PM
kPa mmHg kPa mmHg
mmHg mmHg
)