Read Memory; Clean And Maintenance - Well Health WH-UAEBPM Manual De Instrucciones

READ MEMORY

Press " MEM " button to inquire memory average values "
Display: the latest 3 groups of memory average values (Memory values are
displayed regardless of period).
Press "MEM" button, a memory reading out the latest measurements ,"MEM" for
the buttons(UP). "SET" button for the memory (DOWN)
Power Measurement closure or after the end of the state .can press the "MEM"
button read out the latest measurement of memory.
DELETE MEMORY
The state read out the memory press the (memory) button five seconds, the LCD
display " " has been to delete all memory.
MEM

CLEAN AND MAINTENANCE

1.Keep this device in the case provided with the device when you do not use it.
2.Do not fold the arm cuff too tightly.
3.Clean the monitor with a soft dry cloth. Do not use any cleaning solution.
4.Do not submerge the device or any components in water.
5.Store the device and the components in a clean and safe location;
6.Cuff shall be detached from the device softly and slowly. The clean steps for the
cuff is provided as following
It is recommended that clean the cuff after each use.
Completely wipe the inner side (the side that contacts skin) of the cuff with a soft
cloth lightly moistened with 75% Ethyl alcohol 3 times. Replace the soft cloth
after each wipe.
Then air dry the cuff.
"Average Value