VALBERG IH 4 TB2FZS 007C Instrucciones De Uso página 51

C
2) Specific failure & solution
Failure
The LED does not
come on when unit is
plugged in.
Some buttons can't
work, or the LED
display is not normal.
The Cooking Mode
Indicator comes on,
but heating does not
start.
Heating stops
suddenly during
operation and the
display flashes "u".
Useful information
Problem
No power supplied.
The accessorial
power board and
the display board
connected failure.
The accessorial
power board is
damaged.
The display board is
damaged.
The display board is
damaged.
High temperature
of the hob.
There is something
wrong with the fan.
The power board is
damaged.
Pan Type is wrong.
Pot diameter is too
small.
Cooker has
overheated;
44
Solution A
Check to see if plug
is secured tightly in
outlet and that outlet
is working.
Check the
connection.
Replace the
accessorial power
board.
Replace the display
board.
Replace the display
board.
Ambient temperature
may be too high. Air
Intake or Air Vent
may be blocked.
Check whether the
fan runs smoothly;
if not , replace the
fan.
Replace the power
board.
Use the proper
pot (refer to the
instruction manual.)
Unit is overheated.
Wait for temperature
to return to normal.
Push "ON/OFF"
button to restart unit.
EN
Solution B
Pan detection
circuit is damaged,
replace the power
board.