GASPARDO VITIGREEN Empleo Y Mantenimiento página 23

1.6 HANDLING
If the machine is handled, it must be lifted by hooking (Fig. 2)
onto the appropriate holes with a suitable winch or crane of
sufficient capacity. Because of the danger involved, this operation
should be carried out by trained and responsible personnel.
cod. G19502451
USE AND MAINTENANCE
The mass of the machine is on the identification Plate (8 Fig. 3).
Stretch the rope to keep the machine level. Adjust the length of
the ropes to balance the load. The hook points can be detected
by finding the «Hook» symbol (7 Fig. 4).
g
ENGLISH
fig. 2
23