Diono Radian 3R Manual Del Usuario página 17

INSTALL USING LATCH: 5–35 lb (2.3–15.8 kg)
DO NOT install by this method for a child weighing
more than 35 lb (15.8 kg). Reinstall with vehicle belt
for weights between 35–50 lb (15.8–22.7 kg).
1. Install detachable rear-facing base. Position posts
on rear-facing base into slots on bottom of seat,
aligning arrows-to-arrows. Slide the base back into
place. Press the metal lever to lock base. Confirm
base is locked and does not move.
32
Radian® 3R
2. Remove LATCH strap from
storage location 1 on back of
seat. Use LATCH release on
LATCH connectors and pull up
to remove.
3. Extend the LATCH strap. For
easier installation, extend the
LATCH strap to its maximum
length by pressing the grey
button and pulling on the strap.
4. Place LATCH strap for access
to rear-facing belt path. From
back of seat, unfasten the right
side of the cover from seat
shell. Feed LATCH connectors
down, keeping under the cover
and out the bottom. Once
completed, refasten the cover
to seat shell.
diono.com
1
2
3
3
4
4
33