Diono Radian 3R Manual Del Usuario página 25

INSTALL USING LAP/SHOULDER BELT WITH
5-POINT HARNESS : 22–65 lb (10–29.5 kg)
1. Unhook and remove top tether
from storage location
of seat.
2. Place car seat forward-facing
in back seat of the vehicle. The
entire seat bottom should sit as
flat as possible on the vehicle
seat.
48
Radian® 3R
2 on back 2
1 1
2 2
3. Loosely attach top tether strap.
Do not tighten. Consult vehicle's
owner manual for specific
location.
4. Slide the vehicle seat belt
through the forward-facing belt
path and out the other side.
Buckle it. The seat belt should
lie as flat as possible and not be
twisted.
5. Tighten the vehicle seat belt.
Slowly pull the lap/shoulder belt
all the way out and then let it go
back in. You will hear a clicking
sound as the belt retracts. Slowly
pull out on the belt and it should
be locked. If not, please review
your vehicle owner's manual.
Press down firmly in the center of the car seat. To
tighten, pull from the lap/shoulder belt on the side
nearest to the buckle while feeding the slack back
into the retractor.
diono.com
3 3
4 4
5 5
49