Diono Radian 3R Manual Del Usuario página 31

HARNESS STRAP REMOVE/REPLACE
1. Remove harness straps from the
metal hook on back of seat.
2. Pull the harness straps out from
the back of the seat. Remove the
harness pads and chest clip from
each side. Slide the harness strap
out of the buckle tongues.
3. Using a Phillips head screwdriver,
take out the screws and remove
the access panel. Remove old
harness straps from each side of
the seat.
60
Radian® 3R
4. Insert new harness strap through
1 1
5. Once the strap is pulled up until
2 2
6. Slide the new harness straps through the buckle
7.
3 3
HARNESS STRAP REMOVE/REPLACE
the slot and pull the strap up.
the metal "D" ring is located as
shown, re-fasten and close the
access panel.
tongues, re-attach the chest clip and reinstall the
harness pads.
Slide the harness straps through to the back of the
seat and re-install them to the metal hook in Step 1.
diono.com
4 4
5 5
61