Diono Radian 3R Manual Del Usuario página 23

INSTALL USING LATCH: 22–40 lb (10–18 kg)
DO NOT install by this method for a child weighing
more than 40 lb (18 kg). Reinstall with lap/shoulder belt
for weights between 40–65 lb (18–29.5 kg).
1. Remove LATCH strap from
storage location 1
of seat. Use LATCH release
on the LATCH connectors to
remove.
2. Extend the LATCH strap.
For easier installation, extend
the LATCH strap to its maximum
length by pressing the grey
button and pulling on the strap.
44
Radian® 3R
on back
1
2 2
3. Unhook and remove top tether
strap from storage location
on back of seat.
4. Feed LATCH connectors into
forward-facing belt path. The
LATCH connectors are easier to
feed through by routing behind
cover.
1
5. Place car seat forward-facing in
back seat of the vehicle. Center
the car seat between the vehicle
LATCH anchors. The entire seat
bottom should sit flat on the
vehicle seat.
6. Loosely attach tether strap.
Do not tighten. Consult vehicle's
owner manual for specific
location.
2
2
3 3
7 4 4
5 5 5
6 7 6
diono.com
45