Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
6. HANDLING AND STORAGE
6.1 HANDLING
For unit receipt and unload, arrange:
1. A suitable and well ventilated area with flat ground:
2. Handling equipment, taking into account the overall dimensions, weight and handling points, data present on the unit
to be handled (crane, forklifts, eyelets, sling ropes, snaps hooks, etc.) in order to avoid personal injury and/or property
damage.
Upon receipt of the unit check, consulting the identification nameplate of the product, that it corresponds to the purchase
order specifications, and that the application limits mentioned comply with the intended conditions of use. Check that the
unit is not damaged and/or malfunctioning. If so please contact the Motovario store. Check that the paint is intact and, if
not, provide for its restoration. Dispose of the packaging material in accordance with current rules. Who is entitled to the
handling of the unit will be required to ensure all necessary safety conditions.
It is not always possible to move the unit manually due to its shape and/or weight; use appropriate handling
equipment to avoid personal injury and/or property damage. The weight to be handled is listed in the
catalogue and written on the nameplate.
Proceed carrying out all handling operations with extreme caution. The precautions to be taken during
handling are appropriate to ensure the safety of the operator and protect from breakage or damage the
external parts due to shocks or accidental falls.
Locate the attachment points of the unit (grommets on the B-series reducer, hole on the S-series reducer,
solid shaft threaded hole on the H, R series reducer and variators, foot holes for NMRV-series reducer).
Different accessories (flanges, pumps, control motors) can modify the centre of gravity. In this case, an
additional anchoring point could be necessary. During lifting, do not exceed 15° of load swaying; should this
happen, stop and repeat the operation.
Do not use pipes or threads, protruding accessories or shaft ends as anchoring points, and take special
care to any lubrication and cooling systems.
98
QL0214 ∕ REV.6
Publicidad
