Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
3. COMPLIANCE
The units are designed to meet the safety requirements specifically applicable, Directive by 2014/34/EU.
If used in accordance with the instructions enclosed the units in question can be used in the following
environments:
Group II
Category 3G and 3D
Zone 2/22 for gases and dusts with the following protection methods :
The groups so classified are part of standard manufacture, and are marked to comply with the provisions of
Directive ATEX 2014/34/EU.
3.2 USE CONDITIONS AND LIMITS
Never:
Without authorization, the ATEX approval is void.
94
EN13463-5 (c) constructional safety
Use outside of the ranges indicated on the nameplate;
Use the unit in an area classified (explosive atmosphere) as more dangerous than the level stated on the
label;
Use the unit in an area with equipment class I (mines subject to risks arising from firedamp);
Connect the unit to sources of energy other than those quoted or with values other than those provided
by the manufacturer;
Modify the mounting position or arrangement.
QL0214 ∕ REV.6
Publicidad
