Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
4. TECHNICAL INFORMATION
4.1 CRITICAL APPLICATIONS
The performance specified in the catalogue corresponds to position B3 or similar. For different mounting positions and/or
particular input speeds, refer to the tables that highlight any critical situations for each size of the unit. Also bear in mind
the following applications, and contact MOTOVARIO TECHNICAL SERVICE for further information:
Use in conditions which could lead to injury if the unit fails;
Applications with especially high inertia;
Use as a lifting hoist;
Applications with high dynamic loading of the unit casing;
Use in conditions with T° lower than -5°C or higher than 40°C;
Use in environment with presence of aggressive chemical agents;
Use in a salty environment;
Mounting positions not provided by the catalogue;
Use in a radioactive environment;
Use in ambient with pressure other than the atmospheric one;
Use of self-braking motors coupled to variators/variator-gear reducers;
Applications providing immersion, even partial, of the unit;
Use as multiplier.
Note: The maximum torque bearable by the unit can get twice the Mn2 stated on the label, but only intended for
momentary, non-repetitive overload due to starting at full load, braking, impacts and other dynamic causes.
✔ Verified application.
A- Application not recommended .
B-Check the application and/or call MOTOVARIO TECHNICAL SERVICE.
The shrink disc is designed only to transmit the output torque. In case of mounting position with radial and/or axial loads,
please contact MOTOVARIO TECHNICAL SERVICE.
H
V5 - V1: 1500 < n1 < 3000
n1 > 3000
V3 - V6
H
V5 - V1: 1500 < n1 < 3000
n1 > 3000
V3 - V6
HR
V5 - V1: 1500 < n1 < 3000
n1 > 3000
V3 - V6
A31
A30
✔
✔
B
B
B
B
030
040
050
✔
✔
✔
B
B
B
B
B
B
041
051
✔
✔
B
B
B
B
A40
A50
✔
✔
B
B
B
B
060
080
100
✔
✔
✔
B
B
B
B
B
B
061
081
✔
✔
B
B
B
B
QL0214 ∕ REV.6
A60
✔
B
B
125
140
B
B
A
A
B
B
101
121
✔
B
B
A
B
B
95
Publicidad
