Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
12. UNIT DISPOSAL
During unit disassembling the plastic material must be separated from the metal or the electric material.
The operation may be performed only by skilled operators and in compliance with the current regulations concerning
health and safety at the workplace.
For determining the consecutive and interconnected stages of the company products (life cycle), from the acquisition of
raw materials up to final disposal, the different parts of the products that must be sent to recycling / disposal in
compliance with the current environmental laws are listed here below:
Parts of the gear reducer/motor
Gear wheels, shafts, bearings, connecting keys, safety rings, ....
Casing, parts of the casing
Light alloy casing, parts of the light alloy casing,....
Crowns, bushings,....
Sealing rings, covers, rubber parts,...
Coupling elements, protection covers, variator knobs, motor terminals....
Flat gaskets
Motor terminals, variator screw blocks,...
Rotor and stator
Gear reducer oil
Gear reducer oil
Sealants
Packaging materials
Do not dump in the environment non-biodegradable material, oils, non-ferrous components (PVC, rubber,
resins, etc.).
Do not reuse components which may appear in good order on inspection, have them replaced by
specialised personnel only.
The crossed out wheelie bin symbol on the nameplate or label indicates that the motor must be collected
separately from other waste at the end of its useful life. The separate collection for the delivery of the motor
to recycling, to treatment and environmentally compatible disposal helps avoiding possible negative effects
on the environment and health and promotes the reuse and/or recycling of materials that make up the
motor.
QL0214 ∕ REV.6
Material
Steel
Cast iron
Aluminium
Bronze
Elastomers with steel springs
Plastic
Sealing material
Brass
Copper
Mineral oil
Synthetic oil
Resins
Paper, cardboard
125
Publicidad
