Publicidad
Idiomas disponibles
Idiomas disponibles
Riduttori e Variatori
Istruzioni per installazione ed uso
10. MAINTENANCE
Maintenance must be done by a technician familiar with workplace safety legislation and environmental
issues.
Do not dump polluting fluids, replaced parts or maintenance waste into the environment.
Never improvise repairs!
Before working on the unit disconnect its power supply, being careful to be protected against inadvertent
reactivation, and in any case against the mobility of the components of the unit itself. Wait until the unit
reaches the ambient temperature.
Inform staff working in the area or nearby, by duly signalling the areas nearby and preventing access.
Put in place all necessary measures for environmental safety (dust, gas...).
1. Keep the unit in good running order with periodic checks of vibration and noise, absorption and voltage, wear of
friction surfaces, lubricant leaks, gaskets, bolted gaskets for wear, deformation and corrosion and restore them as
necessary;
2. Keep the unit clean of dust and process residues (do not use solvents or other products incompatible with the
materials of construction, and do not direct high pressure jets of water directly at the unit).
Following the above mentioned rules ensures the operation of the unit and the provided safety level.
QL0214 ∕ REV.6
115
Publicidad
