Publicidad
Idiomas disponibles
Idiomas disponibles
5 – Electrical connection
The machine is supplied ready for connection according to the required specifications.
The appliance is supplied with the power cable without plug, because its fixed
installation is envisaged to the electrical network, so it is necessary to install a general
protection switch.
Before connecting the machine, make sure that the data on the rating plate correspond
to those of the electrical distribution network.
If the power cord is damaged, it must be replaced by the manufacturer, by its after-
sales service or by similar qualified personnel in order to avoid a danger.
The power supply cable must be connected to the connection provided according to
current regulations.
Disconnecting means must be incorporated into the fixed installation in accordance
with the installation regulations.
ATTENTION!
It is essential to connect the machine to a properly grounded connection.
ATTENTION!
The machines model BIG DREAM T 2/3 groups are configured to make a two-
phase (1/2 GR) / three-phase (3 GR) connection, as indicated in the diagram
incorporated into the connection cable. Special attention must be paid to the
connection of each of the phases as well as the cable corresponding to the
neutral of the electrical system.
R = PHASE/FASE
S = PHASE/FASE
T = PHASE/FASE
N = NEUTRAL/
NEUTRO
BL = BLUE/AZUL/BLU/
BLAU/BLEU
YG = YELLOW-GREEN/
AMARILLO-VERDE/
VERDE GIALLO/
GELB-GRÜN/JAUNE-VERT
BR = BROWN/MARRÓN
MARRONE/BRAUN/MARRON
BK = BLACK/NEGRO/
NERO/SCHWARZ/NOIR
GR = GREY/GRIS/GRIGIO/
GRAU/GRIS
11
Publicidad
