Publicidad
Idiomas disponibles
Idiomas disponibles
3 - Characteristics of the machine
The machines of the BIG DREAM T series have been designed to prepare espresso and hot
drinks.
The operating principle consists of a volumetric pump inside the machine that feeds the
hot water and steam boiler, in addition to the independent coffee groups. By activating the
controls, the water is sent to the external brewing units in the form of hot water or steam
according to the needs.
The water to be used to prepare the drinks is taken at the moment of the water network,
pressurized by the pump, passing through a pre-heating circuit through the hot water / steam
boiler, and its temperature is finally raised from the temperature from pre-heating to working
by a heat exchanger.
Each one of the spreader groups, as well as the hot water / steam boiler, can present a
different working temperature, as well as different independent configuration parameters to
optimize the machine's performance before the needs of the user.
The machine is formed by a supporting structure in stainless steel to which the mechanical
and electrical components are fixed. Everything is covered with panels of total coverage
made in Baydur© (polymeric material with high isolation features) and stainless steel. The
productive operations are carried out on the front of the machine and the controls, where the
control devices and the coffee brewing groups are located. In the upper part of the machine
there is a surface destined to heat the cups.
BIG DREAM T
Voltage
Power (w)
Steam boiler (w)
Coffee group (w)
Steam boiler
Max. Pressure (mpa)
Working pressure (mpa)
Volume (l)
Size (mm)
Weight (kg)
Water inlet
Min/max pressure (mpa)
Drain pipe diameter (mm)
1 Coffee filter holder
2 Coffees filter holder
Blind filter
Tamper
Drain pipe
Incoming water pipe
2GR
380V 3F / 220-240V 50/60Hz
5500
3500
2x1000
0,27
0,2
8,5
930x554x593
71
3/8"
0,1 / 0,6
16
1
2
1
1
1
1
3GR
6500
3500
3x1000
0,27
0,2
8,5
1189x554x593
93
3/8"
0,1 / 0,6
1
3
1
1
1
1
9
Publicidad
