Cooper Lighting Solutions Greengate RC3 Instrucciones De Instalación página 10

Room Controller
Connecting the Daylight Sensor to the Room Controller
One DSRC-FMOIR daylight sensor may be connected to the Room Controller. The daylight sensor connects using only
the provided GGRC-COUPLER and QuickConnect Cable to ports 3 or 4 of the Room Controller.
Once the daylight sensor mounting area is prepared, attach the GGRC-COUPLER to the sensor. Connect the Daylight
Sensor to one of the two sensor ports on the Room Controller, using the shortest length of QuickConnect cable from
your QuicKit that will reach the desired location.
Connect the daylight sensor to the coupler.
Connect a QuickConnect cable between the
coupler and one of the sensor Click & Go
ports on the Room Controller.
If occupancy sensors are being used in your
room control strategy, an alternate wiring
method may be used. Wire the daylight sensor
to either the Room Controller or to the nearest
free input/output device.
www.cooperlighting.com
6
White
Switchpack
Red Receptacle
BMS/Out
5
Black Sensors
Green Sensors
Slider
Station
4
Wallstations
-
A/V
+
Mode
- 3
Demand
+
Response
-
Alert
+
Mode
-
Time
Clock + 2
1
Energy Options DIP Switch
Demand Response Occupancy Not Used
1 2 3 4
Default 10% Occ
20% Vac (default)
30%
40%
0-10V Dimming Outputs
- - -
+ + +
Dimmer 3 Dimmer 2 Dimmer 1
Dimmer 3 - Dimmer 2 - Dimmer 1 -
+ + +
0-10V Dimming
GGRC-COUPLER
(Daylight Sensor Coupler)
QuickConnect Cable
(Class 2)
Blue
Red
Black
Brown
OCC-RJ45
(Input/Output Device)
6
Switchpack
White
Receptacle
Red
BMS/Out
5
Black Sensors
Green Sensors
Slider
Station
4
Wallstations
-
A/V
Mode +
-
3
Demand
+
Response
-
Alert
Mode +
-
Time
+
Clock 2
1
Energy Options DIP Switch
Demand Response Occupancy Not Used
1 2 3 4
Default 10% Occ
20% Vac (default)
30%
40%
0-10V Dimming Outputs
- - -
+ + +
Dimmer 3 Dimmer 2 Dimmer 1
Dimmer 3 - Dimmer 2 - Dimmer 1 -
+ + +
0-10V Dimming
GGRC-COUPLER
(Daylight Sensor Coupler)
QuickConnect Cable
(Class 2)
(Input/Output Device)
OR
White Switchpack
Receptacle
Red
BMS/Out
Black Sensors
Sensors
Green
Slider
Station
Wallstations
-
A/V
Mode +
-
Demand
+
Response
-
Alert +
Mode
-
Time
Clock +
Energy Options DIP Switch
Demand Response Occupancy Not Used
1 2 3 4
Default 10% Occ
20% Vac (default)
30%
40%
0-10V Dimming Outputs
- - -
+ + +
Dimmer 3 Dimmer 2 Dimmer 1
(Daylight Sensor Coupler)
Greengate
GGRC-COUPLER
Click & Go Port
(one on each side)
Blue
Red
Black
Brown
OCC-RJ45
6
5
4
3
2
1
Dimmer 3 - Dimmer 2 - Dimmer 1 -
+ + +
0-10V Dimming
QuickConnect Cable
(Class 2)
GGRC-COUPLER
9850-000362-06 page 10
October 2022