Crux ARTISAN Serie Manual De Instrucciones página 9

JAR ASSEMBLY
1. Always check to be sure the blade collar is properly fitted
into the jar before use.
2. To avoid spills, ensure that the lid is firmly secured to
the jar. Press the lid down on the top portion of the jar
until it rests firmly in place. Place the measuring cap
into the center of the lid and twist clockwise to secure it
safely in place. Use the measure cap to measure and add
ingredients prior to commencing any operation.
3. Add ingredients into the jar.
NOTE: When blending, foods or liquids tend to expand as
they rise up the side of the jar. Do not fill jar past its max
line.
WARNING: Pay close attention while processing. Never
operate the blender when the jar
is empty.
OPERATION
WARNING: Never overfill the jar. To avoid personal injury, leakage or damage to the blender, make
sure that ingredients do not surpass the max line.
1. Make sure the lid cap is in position in the lid.
2. Add the lid onto the jar. Press to seal. Check before blending.
WARNING: To avoid spills, make sure the lid is locked securely before pressing any SPEED or or
selecting one of the blending functions.
WARNING: Do not blend hot liquids.
3. After adding ingredients to the jar. Plug in the blender, the ON/OFF indicator will flash.
4. Turn the control dial knob to the desired blending functions and then press the ON/OFF button
to begin processing. The ON/OFF indicator will stop flashing and keep solid light.
5. When using the PULSE function, the indicator light will illuminate when pressed. The blender
will STOP operating and the light will turn off when the button is released.
6. When blending HIGH or LOW SPEED, press the ON/OFF button to STOP blending
when desired consistency is reached.
7. When blending: Puree, LIQUIFY, ICE CRUSH, SMOOTHIE/AUTO CLEAN, press the ON/OFF
button to STOP blending when the desired consistency has been reached. Check results and if
necessary, stir in liquid, water, juice or stock to thin pureed food until the desired consistency is
reached.
WARNING: Do not operate the motor continuously for more than 1 minute at a time.
8. After processing food in the jar, pull the lid up and off jar to remove. The spouted jar makes
pouring easy.
HINT! A small spatula is helpful for removing thicker processed foods.
9. Unplug the blender when not in use and before cleaning.
9
Never fill
jar beyond
the MAX line