Free2Move eSolutions easyWallbox Manual De Instalación página 478

1.
ABOUT THE INSTALLER MANUAL
Thank you for choosing easyWallbox. Please take a few minutes to read the
documentation that will enable you to install it and use it safely, discovering all
its advantages. easyWallbox is a charging device designed and certified up
to 7.4 kW for recharging electric vehicles.
It is a revolutionary product that can be installed in both Plug&Play mode, with a
plug and cable connection to the electricity network, and Power Upgrade
mode. The information in this Installer's Manual is intended for the
easyWallbox installer and user and concerns installation in Power Upgrade
mode, safe use and the basic maintenance of this apparatus.
For installations in France up to 32 A, see the 'Installer's Manual
- Mode 2 Power Upgrade'.
Read the associated documentation carefully to acquire familiarity
with the instructions and safety indications before installing the
product.
Installation in Power Upgrade mode requires qualified personnel,
authorised to create and certify electrical systems in compliance with
local regulations and the energy supply contract, as the connection
to the electricity network is permanent. Personnel must also be
qualified for the installation of systems for recharging electric vehicles.
Before starting installation, the qualified personnel who will make
the installation in Power Upgrade mode must ensure that they
can access easyWallbox PowerUp following the passages required
by the app (see Chapter 4.11).
For installation in Plug&Play mode, see the relative documentation in the
User Manual.
4