Free2Move eSolutions easyWallbox Manual De Instalación página 508

4.8. Installation of the Dynamic Power Management sensor
(optional step)
If the Dynamic Power Management is not required, please go to Chapter 4.9.
easyWallbox can work without Dynamic Power Management.
In this case, the installation of a dedicated sensor is not necessary
but avoidance of blackouts is not guaranteed.
Please read the following instructions carefully before installing the dedicated
Dynamic Power Management (DPM) sensor.
Connection of the Dynamic Power Management sensor requires
installation by a professional technician, in accordance with local
regulations. We advise contacting Assistance for any question or
doubt on the use, installation and maintenance of easyWallbox
(see Chapter 11).
Do not try to install the Dynamic Power Management sensor if you
are not a professional electrician. You may put yourself and others in
great danger and cause serious damage to people, animals and things
(e.g. you could cause a fire).
281175 code
METER
CURRENT
SENSOR
SWITCHBOARD
34