Free2Move eSolutions easyWallbox Manual De Instalación página 529

3.
Remove the power supply cables
Disconnect the earthing wire connected to the J3 'Faston'

terminal (2).
Disconnect the wires connected to the J1 tool-free 'push-lock'

terminals (4).
Remove the power cable from the cable gland (A).

4.
Also remove the sensor cable (if it exists)
Disconnect the twisted cable to the J7 'push-in' spring terminals (6).

Remove the twisted cable from the cable gland (B).

2
4
A
B
6
55