Free2Move eSolutions easyWallbox Manual De Instalación página 526

8.1. Ordinary maintenance Intervals
easyWallbox
recommended to:
always insert the connector into

operation
we advise regular cleaning of the plastic case with a damp cloth

we advise a regular inspection and cleaning of the connector only after

removing the power supply
avoid cleaning

carry out a visual inspection of the device to note defects at every charging

session
carry out a visual inspection on the recharging cable at every charging

session
carry out a visual inspection on the power supply cable at every charging

session and, however, before any connection to the power supply
If the power supply plug is removed from the socket, please place the cable

tidily, if necessary by rolling it around the case of easyWallbox. Anyhow,
the cable must be placed in a safe manner, where it does not obstruct
anyone and cannot be damaged (e.g. pressed by vehicles)
control of operational readiness.

easyWallbox does not contain components that the user can repair
or maintain autonomously.
The only part that can be removed from easyWallbox is the
removable cover, only during the installation and dismantling
stages and following the instructions. easyWallbox must not be
opened further unless by qualified personnel during installation
in Power Upgrade mode, dismantling or maintenance.
does not require specific maintenance. However, it is
easyWallbox with aggressive solvents or abrasive materials
easyWallbox when the device is not in
52