Free2Move eSolutions easyWallbox Manual De Instalación página 514

Figure 5 shows a domestic electrical system with PV system which needs some
modifications to create the ideal point for DPM sensor installation. The DPM
installation point represented in Figure 5 is wrong.
In case of modifying the connections of a domestic PV system to make it compatible
with operation of easyWallbox
it to a model similar Figure 4.
Figura 5. Visione schematica di un'errata connessione di easyWallbox e DPM ad un impianto
elettrico con sistema fotovoltaico in modalità Power Upgrade
Figure 4 and Figure 5 have illustrative purpose only and may not represent
the real installation of
user and installer manuals and local regulations for further information about
easyWallbox installation.
Similar consideration proposed in this section should be applied properly on a
three-phase system with PV system.
and its DPM sensor, it is recommended to change
easyWallbox in Power Upgrade mode. Please refer to
DPM:
Dynamic power management sensor
RCD:
Residual current device
MCB:
Miniature circuit breaker
eWB: easyWallbox
PV:
photovoltaic system
40