Publicidad
Idiomas disponibles
Idiomas disponibles
The installation and parameter set-up should be in accordance
with local applicable standards. Please check local updates of
standards before setting up parameters.
The following table contains indicative values of maximum currents for each
installation country, to be checked however before any installation:
Country
1. Germany
2. France
3. UK
4. Belgium
5. Luxembourg
6. Netherlands
7. Switzerland
8. Austria
9. Poland
10. Greece
1.
Open
2.
Accept the safety information.
3.
Focus on the authentication QR code available (see Chapter 5.2)
4.
Set the 'Safety limit' determined according to the above definitions.
5.
Set the 'User limit' determined according to the above definitions.
6.
Check if the rotary selector (U14) is in position 2, the app allows the DPM to
be enabled/disabled.
a. If the sensor has not been installed or this function is not required, set
the DPM to Off (DPM is at Off by default).
b. If the sensor has been installed in accordance with the instructions of
section 4.8, set 'DPM' to On and set 'DPM limit' based on the user's
electricity supply contract.
If the instructions of this chapter are not followed, all the
parameters will remain as initially set for the Plug&Play mode.
This reduces the performance of easyWallbox.
Safety limit
in Power
Upgrade [A]
20
32
32
22
32
22
16
16
32
32
easyWallbox
PowerUp on your smartphone.
Country
11. Czech Republic
12. Slovakia
13. Hungary
14. Denmark
15. Sweden
16. Italy
17. Spain
18. Portugal
19. Norway
Safety limit
in Power
Upgrade [A]
25
20
32
16
32
26
32
32
32
44
Publicidad
