Free2Move eSolutions easyWallbox Manual De Instalación página 521

6.
CHARGING PROCEDURE
Once installation is completed, recharging an electric vehicle with
is very easy. All you have to do is:
1.
Check to see whether the LED status indicator is BLUE
(see Chapter 6.1).
2.
Extract the connector from
3.
Insert the connector into the electric vehicle
- Vehicle adaptors should not be used to connect a vehicle connector
to a vehicle inlet.
- Avoid dynamic stress of the cable. Do not pull or twist it.
For information on completion of charging, please continue to Chapter 7.
2
1
easyWallbox
easyWallbox
47