4.3
Collecting and depositing loads
M
Before picking up a load, the driver must ensure that it is correctly palletised and that
the capacity of the truck is not exceeded.
It is forbidden to collect long loads at an angle.
– If needed, lower load lifting device by
pressing the handle (2) in direction "S" and
then bring the handle to the "neutral" (4)
position.
– Fully insert the truck and the load handler
underneath the load unit.
Lift/Lower
Lift
– Press handle (2) in direction "H".
– Lift the load fork by moving the tiller (1) up
and down, until the desired lifting height is
achieved.
Lower
– Press handle (2) in direction "S", the load is lowered.
Z
When moving a laden truck, the handle (2) must be in the "neutral" (4) position.
4.4
Parking the truck securely
F
Always park the truck securely.
Do not park the truck on an incline.
The load fork must always be lowered to the ground.
3
2
H
1
S
4
C 5