D Forklift Truck Maintenance; Operational Safety And Environmental Protection; Maintenance Safety Regulations; Servicing And Inspection - Jungheinrich AM 2000 INOX Instrucciones De Servicio

D Forklift Truck Maintenance

1

Operational safety and environmental protection

The servicing and inspection duties contained in this chapter must be performed in
accordance with the intervals indicated in the maintenance checklists.
F
Any modification to the forklift truck assemblies, in particular the safety mechanisms,
is prohibited. The operational speeds of the truck must not be changed under any
circumstances.
M
Only original spare parts have been certified by our quality assurance department. To
ensure safe and reliable operation of the forklift truck, use only the manufacturer's
spare parts. Used parts, oils and fuels must be disposed of in accordance with the
relevant environmental protection regulations. For oil changes, contact the
manufacturer's specialist department.
Upon completion of inspection and servicing, the tasks contained in the
"Recommissioning" section must be performed (see D 6.4).
2

Maintenance Safety Regulations

Maintenance personnel: Industrial trucks must only be serviced and maintained by
the manufacturer's trained personnel. The manufacturer's service department has
field technicians specially trained for these tasks. We therefore recommend a
maintenance contract with the manufacturer's local service centre.
Lifting and jacking up: When an industrial truck is to be lifted, the lifting gear must
only be secured to the points specially provided for this purpose. When jacking up the
truck, take appropriate measures to prevent the truck from slipping or tipping over
(e.g. wedges, wooden blocks). You may only work underneath a raised load handler
if it is supported by a sufficiently strong chain.
Tyres: The quality of tyres affects the stability and performance of the truck. When
replacing wheels/rollers fitted at the factory, only use manufacturer's original spare
parts. Otherwise the truck's rated performance cannot be ensured.
3

Servicing and inspection

Thorough and expert servicing is one of the most important requirements for the safe
operation of the industrial truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
The following maintenance checklist states the tasks and intervals after which they
should be carried out. Maintenance intervals are defined as:
W = Every
A = Every 500 service hours
B = Every 1000 service hours
C = Every 2000 service hours, or at least annually
Z
W service intervals are to be performed by the customer.
50 service hours, at least weekly
D 1