A Regulatory Use Of Machine - Jungheinrich AM 2000 INOX Instrucciones De Servicio

A Regulatory Use of Machine

Z
The document „Guidelines for the Regulatory and Correct Use of Materials Handling
Equipment" (VDMA) is part of the delivery of this vehicle (VDMA). It forms part of the
Operator Manual and its contents should be carefully observed. National regulations
shall apply in their entirety.
The vehicle described in this instruction is a materials handling vehicle suitable for
lifting and transporting loads. It must be employed, operated and maintained in
accordance with the information contained in this manual. Any other use is not in
keeping with this directive and can lead to damage to persons, machine or property.
Above all overloading the machine due to excessively heavy loads or incorrectly
positioned loads must be avoided. The maximum permissible load to be lifted is
displayed on a data plate attached to the vehicle or on the load diagram. The vehicle
must not be operated in areas exposed to the risk of fire or explosion, nor in a very
dusty environment.
Duties of the Operator: In keeping with the sense of this manual the operator is any
natural or legal person who operates the vehicle or for whom it is operated by another
person. In special cases (e.g. leasing, hire) the operator is the person who in
accordance with the existing contractual agreement between the owner and the user
of the vehicle undertakes to carry out such operating duties.
The operator must ensure that the vehicle is only used in accordance with the
regulations and danger to life and limb of the user or a third party is avoided.
Furthermore, regulations concerning accident prevention and special safety rules as
well as guidelines for driving, maintenance and commissioning shall be observed.
The operator must ensure that all users of the vehicle have read and understood this
instruction.
M
Non compliance with this instruction will render our warranty invalid. This also applies
if sub-standard work has been carried out on the vehicle by the client and /or a third
person without the consent of the manufacturer's service department.
Fitting Attachments: Fitting or installing additional equipment which affects the
operation of the vehicle or enhances these functions may only be undertaken with the
written permission of the manufacturer. Where necessary permission shall be
obtained from the local authority.
Local authority approval does not take precedence over manufacturer's approval.
A 1