MIR SPIRODOC Manual De Usuario página 68

Doctor Mode
The information displayed are:
•
Spirometry parameter setting
•
Oximetry parameter setting
•
Spirometry and oximetry tests in memory
•
Free memory available
Patient Mode
The information displayed are:
•
Number of activated symptoms
•
Number of activated questions
•
Spirometry and oximetry tests in memory
•
Free memory available
To turn off Spirodoc press the key placed on top and subsequently touch OK on
the bottom right side of the screen. It is possible to turn off the device by keeping
the top key pressed.
The message on the right side is shown after pressing the key on top It serves as a
guide to follow the procedure properly.
2.3 PIN request
After the first screen the device will ask the user to protect the access with a PIN.
Press OK if you want to set a personal PIN
or
press to skip this function.
Pressing OK then a message requires to confirm the use of a PIN: press OK to
continue or to skip this function.
Insert a PIN using the numeric keyboard and press OK
Repeat the PIN and press OK
Then the device shows the main screen.
From this moment each time the device is switched on the PIN needs to be inserted.
If the PIN is incorrect the user can try again; (the device allows 20 attempts per day).
After 20 attempts the user needs to wait for the next day to unlock the device.
If the user forgot the PIN send an inquiry to the following website:
www.spirometry.com/getpin
Complete the fields and insert the DEVICE ID shown on the popup on the
screen.
After the registration the system will send an e-mail to the address inserted on the
web site with the PIN to unlock the device.
2.4 Energy saving
WARNING
When the device is turned on after approximately 1 minute of disuse the display enters energy saving mode thereby
automatically lowering the display contrast level.
SPIRODOC cod. 980156 Rev 4.2.1
spirodoc
User manual
EN 22/48