Publicidad
Idiomas disponibles
Idiomas disponibles
2.15
Testing without patient data
This function is available in Doctor Mode only, allowing the user to perform spirometry and oximetry testing without inserting any data
related to the patient being tested.
The user may access this function by touching the
Within the screen area the user may access the following functions:
spirometry test
oximetry test
walk test
sleep oximetry
send data via Bluetooth
WARNING
Spirometry test results do not include any automatic interpretation compared with the predicted values as no patient
anthropometric data was previously included.
3.
DATA TRANSMISSION
WARNING
Please read carefully and make sure to have properly understood the instructions before commencing the data trasmission.
WARNING
The Bluetooth wireless communication is intended as an add-on function. In case of Bluetooth transmission failure, we
recommend the use of more reliable USB technology.
3.1
Printing a test
SPIRODOC makes it possible to print the tests carried out, both of the last session completed and of the tests in the archive, by means
of a printer connected via USB.
The connection of SPIRODOC to a printer is made with a micro-USB to type A host adapter.
The printer must be a postscript printer.
3.1.1
How to print a test saved in the database
•
From the main screen touch the
•
Select a search method
•
Select the test session in which the test of interest was performed
•
Upon entering the test session select the test and touch the
3.1.2
How to print a test of the last session
•
From the main screen touch the icon
•
Touch then the icon
•
Touch the icon
corresponding to one of the test of the last session
•
In the following screen touch the icon
3.2
PC connection via USB port
WARNING
Before connecting the Spirodoc via USB to the PC, the MIR Spiro software must be installed on the PC first to enable the
software to interface with the device.
Before initiating the following procedure it is important to know the operating system version installed on the PC used for
the connection (from control panel click on "System", where the type of operating system installed on the PC can be checked).
If MIR Spiro is already installed on the PC then a new installation is not required.
SPIRODOC
icon on the main screen.
icon
icon.
for a spirometry test,
to show data of the test or the icon
cod. 980156
for an oximetry test
to print via Bluetooth connection the test.
Rev 4.2.1
spirodoc
User manual
EN 44/48
Publicidad
