Saivod SAP1218 Manual De Instrucciones página 80

Operation introduction for control panel
Name of control panel
4
Operation of control panel
1
Power
Press once to start and press once more to stop the unit.
2
Mode
Press this button to change the operation mode as below:
SAPH128:COOL → DRY → FAN→HEAT
SAP1218:COOL→ DRY → FAN→ COOL
3
" " " "
In "COOL" or "HEAT" mode, press "
1°C(°F). Press "
can be selected from 16°C(61°F) ~ 30°C(86°F)
4
Fan
Press this button to change the operation fan in order of: LOW→MED→TURBO
→AUTO.
5
Timer
Press timer button to enter into timer setting mode. Under this mode, press "
or " " button to adjust the timer setting. Timer setting will increase or decrease
0.5 hour by pressing "
increase or decrease 1 hour by pressing "
After timer setting is finished, the unit will display temperature if there's no
operation for 5s. If timer function is started up, the upper indicator will keep the
display status. Others, it won't be displayed. Under timer mode, press timer button
again to cancel timer mode.
3
" once, the temperature will increase 1°C(°F). The temperature
" or " " button within 10 hours, while timer setting will
1 5 6
" once, the temperature will decrease
" or " " button beyond 10 hours.
2
"