Mute Mode (Silent Mode); Turning Mute Mode On/Off Using The Cockpit App; Turning Mute Mode On/Off Using The Remote Control; Deep Sleep Mode - Ottobock Genium X3 3B5-2 Instrucciones De Uso

Menu option
Bluetooth: On

8.6 Mute mode (silent mode)

Activating mute mode (silent mode) turns off the audible feedback signals and the vibration sig­
nals. However, warnings in case of component errors are still generated (see Page 87).
Mute mode can be activated/deactivated by using the Cockpit app or the remote control (optional
accessory).
INFORMATION
Connecting the battery charger automatically deactivates mute mode again.

8.6.1 Turning mute mode on/off using the Cockpit app

1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Mute mode".
4) Follow the on-screen instructions.

8.6.2 Turning mute mode on/off using the remote control

1) When a connection is established, use the
the main menu and confirm this with the key.
keys to select the Mute menu option. The current status is displayed.
2) Use the ,
3) By pressing the key, mute mode is either turned on (On) or turned off (Off).
4) To leave the menu without saving changes, use the
confirm this with the key.

8.7 Deep sleep mode

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The cockpit app or remote control (optional accessory) can be used to place the knee joint in a
deep sleep mode, in which power consumption is minimised. The knee joint offers no functionality
in this mode. The safety mode damping values are activated.
It can be awakened from deep sleep mode with the cockpit app, remote control or by connecting
the charger. Waking from deep sleep mode using the cockpit app or remote control can take up
to 30 seconds.
After ending deep sleep mode, the knee joint is in basic mode again.

8.7.1 Turning deep sleep mode on/off using the Cockpit app

Activating deep sleep mode
1) When the component is connected, tap the symbol in the main menu.
→ The navigation menu opens.
2) In the navigation menu, tap the entry "Functions".
3) Tap the entry "Activate Deep Sleep".
4) Follow the on-screen instructions.
→ The activation of deep sleep mode is indicated by a short beep signal and a short vibration
signal, assuming that mute mode (silent mode) is not active.
80 | Ottobock
Description
Turning the Bluetooth function
of the prosthesis on/off. The
current status is displayed.
,
Possible actions
The Bluetooth function of the
prosthesis can be turned on or
off (see Page 78) by confirm­
ing the menu item with the
key.
keys to select the "Status" menu option in
key to select the symbol and