Honda GX160UD Manual Del Propietário página 16

TECHNICAL INFORMATION
Serial Number Location
Record the engine serial number,
type and purchase date in the
spaces below. You will need this
information when ordering parts
and when making technical or
warranty inquiries.
Engine serial number: __ __ __ __ — __ __ __ __ __ __ __
Engine type: ___ ___ ___ ___
Date Purchased: ______ / ______ / ______
Battery Connections for Electric Starter (applicable types)
Use a 12-volt battery with an ampere-hour rating of at least 18 Ah.
Be careful not to connect the battery in reverse polarity, as this will short
circuit the battery charging system. Always connect the positive (+)
battery cable to the battery terminal before connecting the negative (–)
battery cable, so your tools cannot cause a short circuit if they touch a
grounded part while tightening the positive (+) battery cable end.
A battery can explode if you do not follow the correct
procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials away
from the battery.
The battery contains sulfuric acid (electrolyte), which is
highly corrosive and poisonous.
Getting electrolyte in your eyes or on your skin can cause
serious burns.
Wear protective clothing and eye protection when working
near the battery.
KEEP CHILDREN AWAY FROM THE BATTERY.
WARNING: Battery posts, terminals, and related accessories contain lead
and lead compounds. Wash your hands after handling.
1. Connect the battery positive (+) cable to the starter solenoid terminal
as shown.
2. Connect the battery negative (–) cable to an engine mounting bolt,
frame bolt, or other good engine ground connection.
3. Connect the battery positive (+) cable to the battery positive (+)
terminal as shown.
4. Connect the battery negative (–) cable to the battery negative (–)
terminal as shown.
16
ELECTRIC
STARTER
(applicable
types)
SERIAL NUMBER &
ENGINE TYPE LOCATION
5. Coat the terminals and cable ends with grease.
NEGATIVE (–)
BATTERY CABLE
Remote Control Linkage
The throttle and choke control levers are provided with holes for optional
cable attachment. The following illustrations show installation examples
for a solid wire cable and for a flexible, braided wire cable. If using a
flexible, braided wire cable, add a return spring as shown.
It is necessary to loosen the throttle lever friction nut when operating the
throttle with a remote-mounted control.
REMOTE THROTTLE LINKAGE
THROTTLE LEVER
FRICTION NUT
Flexible wire core
mounting
WIRE
5 mm
CIRCLIP
Solid wire core
mounting
REMOTE CHOKE LINKAGE
ENGLISH
STARTER
SOLENOID
POSITIVE (+) BATTERY CABLE
RETURN
SPRING
4 mm SCREW
OPTIONAL
WIRE HOLDER
THROTTLE
LEVER
WIRE HOLDER
CHOKE LEVER