Kenwood KAX720PL Instrucciones página 11

Care and Cleaning
Refer to Illustration
Always switch off, unplug and take the juicer
apart before cleaning.
Some discolouration of parts may occur
upon using ingredients such as carrot or
leafy vegetables.
Cleaning all parts immediately after each use
will help to reduce stains.
Do not clean the pulp or filter outlet with a
sharp pointed object such as the end of a
knife as you will damage the bowl. Use the
tip of the cleaning brush handle to clean the
outlets.
Drive unit
Wipe with a damp cloth, then dry.
Do not immerse in water.
Service and Customer Care
UK only
If you need help with:
using your attachment
servicing or repairs (in or out of guarantee)
call Kenwood customer care on 0345 222 0458. Have your model number (KAX720PL) and
date code (e.g. 23B08) ready. They are on the attachment outer carton.
spares and attachments
call 0844 557 3653.
other countries
If you experience any problems with the operation of your attachment, before
requesting assistance refer to the "Troubleshooting guide" section in the manual or visit
www.kenwoodworld.com.
Please note that your product is covered by a warranty, which complies with all legal
provisions concerning any existing warranty and consumer rights in the country where the
product was purchased.
If your Kenwood product malfunctions or you find any defects, please send it or bring it to an
authorised KENWOOD Service Centre. To find up to date details of your nearest authorised
KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your
Country.
Designed and engineered by Kenwood in the UK.
Made in China.
Q
Filter
To assist with removal of pulp and fibres,
place the anti-drip stopper in the closed
position. Switch the juicer on and pour
approximately 300mls water down the feed
tube. Operate the juicer for approximately 20
seconds, place the juice jug under the juice
spout and open the stopper to allow the
water to flow out.
Always clean the filter basket immediately
after juicing.
Use the brush supplied to clean the filter.
For best results, rinse under water and brush
until clear.
Wiper holder
The wipers in the filter holder can be
removed for cleaning. To assemble, Insert the
upper/lower wipers into the gap of the filter
holder and secure. Ensure that the wipers
are replaced and fitted correctly before
assembling the juicer.
7