Kenwood KAX720PL Instrucciones página 7

Only use the appliance for its intended domestic use. Kenwood will not
accept any liability if the appliance is subject to improper use, or failure to
comply with these instructions.
Refer to your main Stand Mixer instruction book for additional safety
warnings.
Cleaning
Drive unit - Wipe with a damp cloth, then dry. Do no immerse in water.
Do not clean the pulp or filter outlet with a sharp pointed object such as the
end of a knife as you will damage the bowl. Use the tip of the cleaning brush
handle to clean the outlets.
Use the brush supplied to clean the filter. For best results, rinse under water
and brush until clear.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to
come into contact with food.
This attachment features the Twist Connection
System and is designed to fit directly
on the latest generation Kenwood Chef
models (identified as TYPE KVC, KVL,
KCC, KWL and KCL).
This attachment can also fit KMix Stand Mixers
featuring a slow speed attachment outlet
(TYPE KMX).
To check that this attachment is compatible
with your Stand Mixer you will need to ensure
both components feature the Twist Connection
.
System
If your Stand Mixer features the Bar Connection
System you will also need an adaptor
before operation is possible. The reference
code for the adaptor is KAT001ME. For more
information and how to order the adaptor visit
www.kenwoodworld.com.
Before using for the first time
Wash the parts: see 'Care and Cleaning'.
Key
Pusher
Lid with hopper
Scroll
Filter basket
Rotating wiper holder
Juicing bowl
Pulp spout
Juice spout
Anti-drip stopper
Drive shaft
Drive unit
Juice jug
Cleaning brush
Spanner
To Assemble your Juicer
Refer to Illustrations
C D
–
Fit the pulp stopper into the opening on the
underside of the juicing bowl
until secure.
E F
–
Fit the juicing bowl
aligning the on the side of the bowl with
the on the drive unit. To lock the bowl on
turn it clockwise until the
on the drive unit.
G
Place the filter basket
holder .
H
Lower the wiper holder assembly into the
juicing bowl and align the
the top of the drive unit. Ensure that the filter
basket is locked into place.
I
Place the scroll
push down to secure. Note: the lid cannot
be fitted if the scroll is not fully pushed down.
3
C J
–
and push in
to the drive unit by
line up with the
into the wiper
with the
into the filter basket and
on