Yamaha RHINO 700FI 2008 Manual Del Propietário página 374

1. Bolt (× 3)

1. Vis (× 3)

1. Perno (× 3)

2. Spark arrester

1. Tube d'échappement arrière

1. Tubo de escape

2. Pare-étincelles

2. Parachispas

Cleaning the spark arrester

Hot exhaust system may cause burns. To

avoid burns or fires, make sure that the engine

is stopped and the exhaust system is cool be-

fore cleaning spark arrester. Do not start the

engine while cleaning the exhaust system.

1. Remove the bolts.

2. Remove the tailpipe by pulling it out of the

muffler, and then remove the gasket.

3. Tap the tailpipe lightly, and then use a wire

brush to remove any carbon deposits from

the spark arrester portion of the tailpipe and

inside of the tailpipe housing.

4. Install the gasket, and then insert the tailpipe

into the muffler and align the bolt holes.

5. Install the bolts and tighten them to the spec-

ified torque.