Description Of Control Panel - Castolin Eutectic TotalArc 3000 Manual De Instrucciones

Description of control panel

Fig.2 Control panel
The functions on the control panel are all arranged in a very
logical way. The various parameters needed for welding are
easy to select.
Thanks to the "Synergic" function, whenever you alter any one
parameter, suitable adjustments will automatically be made to
all the other parameters.
Adjusting dial ... for altering following parameters
- welding power (at programm-mode)
- welding amperage (at manual-mode)
- wire feed speed
- sheet thickness
If the indicator is lit up on the adjusting dial, then the selected
parameters can be altered.
Adjusting dial ... for altering following parameters
- arc-length correction
- arc-force correction
- pulse correction
- welding voltage (at manual-mode)
If the indicator is lit up on the adjusting dial, then the selected
parameters can be altered.
Parameter selection button ... for selecting the following
parameters:
- welding voltage
- arc-length correction
- arc-force correction
- pulse correction
If the indicator is lit up on the adjusting dial
of the selected parameters can be altered.
Parameter selection button ... for selecting the following
parameters:
- welding current
- wire feed speed
- sheet thickness
If the indicator is lit up on adjusting dial
parameters can be altered.
Process button ... for selecting the welding process
- MIG/MAG welding
- Manual electrode welding
- TIG-welding with touch-down ignition
MIG/MAG mode button ... for selecting the MIG/MAG
operating mode
- MIG/MAG standard program-mode
- MIG/MAG pulsed-arc program-mode
- MIG/MAG manual-mode
- MIG/MAG job-mode (MEM)
34
, then the value
, then the selected