Power Source Totalarc² 4000 / 5000 - Castolin Eutectic TotalArc 3000 Manual De Instrucciones

Power source TotalArc² 4000 / 5000
Fig.5a Front view of power source TotalArc² 4000 / 5000
- Current socket with bayonet latch ... for
- connecting the earth cable in MIG/MAG welding
- current connection for TIG welding torch
- connecting hand-held electrodes or the earth cable in
manual electrode welding (depending on the type of
electrode being used)
- Current socket with bayonet latch ... for
- connecting the earth cable in TIG welding
- connecting hand-held electrodes or the earth cable in
manual electrode welding (depending on the type of
electrode being used)
- Current socket with bayonet latch ... for
- connecting the interconnecting cable in MIG/MAG wel-
ding
Torch control connection socket ... for connecting the
torch control plug of the interconnecting cable
Blanking cover
Mains switch ... for switching the power source on and off
Fig.5 Rear view of power source TotalArc² 4000 / 5000
Mains cable with strain-relief device
Screw cap / filler neck for coolant
Coolant inspection window
Fuse for coolant pump
Motor-shaft lead-through of the coolant pump
Plug-type connection for water forward flow (black)
Plug-type connection for water return flow (red)
Tank draining hose (inside housing)... for emptying the
coolant reservoir
37