Publicidad
support@nextlevelracing.com
27
Use the Strengthening Straps to secure all parts together. Thread the straps through the Wheel Plate, Backrest
and Pedal Frame.
28
A
A) Close the Hub's cam levers to secure the cockpit and prevent it from opening. B) Grab the Pedals Support
Frame Tube and lift the cockpit until it is resting on the roller wheels. Move to the storage location.
Use correct posture
B
The cockpit with all the peripherals is
a heavy object, proceed with caution.
20
WARNING
Do not use power tools for assembly as over tightening can damage the frame.
Do not adjust the Hubs while sitting in cockpit.
Make sure the Hubs are tightened fully before using the cockpit.
Spin the Hub's cam levers clockwise to ensure the Hubs are fully tight.
Make sure the strap on Wheel Bar is tight when adjusting the Hubs, otherwise the Wheel Plate Tube will fall when
the Hubs are open.
ASSISTANCE
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
Video Instruction: bit.ly/nlrbuild
ASSEMBLY
VIDEO
21
Publicidad
